Skorpion G Rheinmetall German Tank Destroyer 1:35 scale resin kit

1/35 scale, unpainted resin kit.

Email when stock available



In early 1942 Wa.Prüf 4, the German organization in charge of field artillery, put forward a design requirement for a vehicle to move heavy artillery. The main stipulation was that it should use parts from the new Panther medium tank. A similar competition was already underway for a vehicle to move lighter field artillery, such as 10.5 cm guns, using the Geschützwagen III/IV chassis. This had inspired Wa.Prüf 4 to do the same for a vehicle to move heavier 12.8 cm and 15 cm artillery pieces, as the Geschützwagen III/IV was too small to handle them. The guns in question were the 12.8 cm K 43 and 15 cm sFH 43. The sFH 43 (schwerer Feld Haubitze, heavy field howitzer) was a projected improvement on the 15 cm sFH 18, the new gun was to use bagged propellant and had a screw-type breech. The 12.8 cm Kanone 43 is unknown in most literature but is presumably a predecessor to the 12.8 cm K 44 L/55. Neither of these cannons were ever built. In order to keep weight down, the designs were to be open-topped. Prototypes were to be built using Panther parts, but it was projected that any serial production vehicles would be made using the Panther II chassis. This idea was discarded when the Panther II was cancelled in June of 1943.

Both Krupp and Rheinmetall-Borsig took part in this design competition. All designs were able to be transported by rail with a few adjustments, and all could carry at least 30 rounds, however, Rheinmetall’s design had trouble with this.

Design and Fate

Like Krupp, Rheinmetall-Borsig also presented their first designs on the 1st of July, 1942. They were the 12.8 cm K 43 (Sfl.) Rheinmetall-Borsig (indexed Gerät 5-1213), and 15 cm sFH 43 (Sfl.) Rheinmetall-Borsig (indexed Gerät 5-1530). The vehicles were identical except for armament. Both had a 360-degree rotating turret and a hydraulic gun dismounting mechanism designed by Daimler-Benz, similar to that used on the Heuschrecke 10.

On January 7th, 1943, Rheinmetall produced three more designs. In reality, these were the same vehicle, but with different armaments. The vehicles had centrally mounted, 360-degree rotating, dismountable turrets. The chassis was that of a Panther, extended to a wheelbase of 4,220mm. They were designated 15 cm sFH 43, 12.8 cm K 43 and 12.8 cm P 43. On or around the 24th of February, 1943, Rheinmetall’s entry for the Selbstfahrlafette für 12.8 cm K 43 und 15 cm sFH 43 Project was assigned the cover name “Skorpion”. This

1/35 scale, unpainted resin kit.